Manual

The Pure Energy Regulator is a second stage regulator. The internal configuration and spring rates were

chosen to optimize the Pure Energy Regulator for input pressures in the 800 to 1200 psi range, and the

Pure Energy Regulator’s adjustment allows the delivery pressure to the gun to be adjusted anywhere in the

200 to 800 psi range. It is recommended that you use an anti-siphon tank or a remote if you use CO

with this regulator. Liquid CO

will lead to erratic velocity.

The Pure Energy Regulator is adjusted with a 3/32”Allen Key inserted into the bottom end of the reg.

Turning the Allen Key counter clockwise increases output pressure and turning it clockwise reduces the

output pressure. It is necessary to cycle the gun, so that the new setting can take effect. Higher output

means higher velocity. Lower output means lower velocity but it might mean the marker will have

problems properly recocking. DO NOT EXCEED 300 fps.

ADJUSTING THE PURE ENERGY REGULATOR

PMI Piranha™30

pure energy vertical regulator

WARNING

The Pure Energy Regulator stays pressurized after the

tank is removed. The marker can still fire after the tank

is taken off!