Manual

WARNING
DO NOT ATTEMPT TO COMPLETELY DISASSEMBLE YOUR PIRANHA™ UNLESS QUALIFIED TO DO SO.
CONTACT PMI, INC., FOR REPAIR ASSISTANCE AND INFORMATION REGARDING AUTHORIZED PMI PIRANHA™
REPAIR FACILITIES. PHONE [phone] /BUYPMI.COM
PAINTBALL MARKER POWER SYSTEMS MUST BE REPAIRED OR REPLACED ONLY WITH THE CORRECT
PRESSURE RATED COMPONENTS.
1. Before disassembling the marker remove the power source, then remove all paintballs from the
marker, barrel, and loader.
2. To remove the bottom line air system (if needed), detach the bottom line ASA from the grip by removing
the two screws. Figure 39. Then unscrew the port reducer; vertical grip or regulator from the vertical
ASA adapter. Figure 40.
3. To remove trigger frame from the receiver,
remove the two large 1/8” socket allen screws
under the receiver.One is in front of the
trigger guard and one is behind the grip
portion of the frame. Figure 41. The
receiver then will disassemble from the
trigger frame.
Figure 39
Figure 40
Figure 41
Vertical ASA Adapter
Port Reducer
Large
Allen Screw
Large
Allen Screw
Grip
Bottom
line ASA
COMPLETE DISASSEMBLY
PMI Piranha™28