Manual

4. Grasp the block assembly and slowly begin to pull the bolt/hammer assembly out of the marker. Figure 11
5. When the bolt/hammer assembly is about halfway out, grasp it with one hand and continue to hold it
intact while removing it completely from the marker. Figure 12
LUBRICATION
It is recommended that a 100% synthetic gun oil, such as PMI Paintball Gun Oil, be used for lubricating the
marker.
1. Before each insertion of the removable power source (tank or remote line) into the ASA, clean the threads
and put two drops of oil onto them.
2. After removing the bolt/hammer assembly, put a drop of oil onto each o-ring.
3. Before screwing the barrel onto the marker clean the barrel threads.
4. After removing the trigger frame, put a drop of oil onto the pivot points of the trigger and sear.
5. The fastest way to oil the entire Piranha is to take off the barrel; put 4 drops of oil into the ASA, screw the
bottle in over the oil, and shoot the gun several dozen times without the barrel.
Figure 13 Bolt-hammer assembly
removed.
Figure 11
Figure 12 Grasp assembly.
PMI Piranha™24
LUBRICATION