Quick Assembly Guide

7
Place the pointed side of the locking washer into the
hole on the fork. Make sure the gap between the
wheel and the fork is equal on both sides.
Tighten the nut with the spanner provided.
THE PIN ON THE LOCKING
WASHER MUST BE PLACED
IN THE HOLE.
C
Locking washers must be posioned correctly in this step:
CORRECT BRAKE & WHEEL FITTING IS VERY IMPORTANT FOR YOUR SAFETY
IF YOU HAVE ANY PROBLEMS THERE IS MORE INFORMATION IN THE USER MANUAL
FAILURE TO CORRECTLY SET THE BRAKES MAY RESULT IN SERIOUS INJURY
i
ii
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE
D
Once the wheel is in place and ght, turn the bike the
right way up
Squeeze the brake arms together
Slot the brake cable noodle into the slot as
shown