Quick Assembly Guide

5
MINIMUM
INSERTION
MARK
2.- FITTING THE SADDLE
A B
Using the spanner provided, lock the seat in posion
by turning bolt in a clockwise direcon. Do not fully
ghten unl the end as you may need to adjust the
height.
Insert saddle into frame. Make sure the minumum
insertion mark is not visible once this is tted. The
saddle must be inserted beyond this point
SADDLE
FRAME
TOOLS NEEDED
SPANNER
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE