Quick Assembly Guide
4
1.- FITTING THE HANDLEBAR
A
Insert the handlebar into the frame. If
necessary loosen the stem bolt at the top of
the handlebars and stem to allow the wedge
nut to move freely. Make sure the minimum
inseron mark is not visible once this is fied.
The handlebar must be inserted beyond this
point.
B
The handlebar must be straight. Align this with the fork by
looking downwards at it. The brakes must be facing the front
of the bike. Use the allen key to ghten the bolt on top of the
handlebar stem. Do not fully ghten unl the end as you may
need to adjust the height.
BIKE FRAME
MINIMUM
INSERTION
MARK
HANDLEBAR
TOOLS NEEDED
ALLEN KEY
ALLEN BOLT
Front of bike
Front of bike
Rear of bike
Rear of bike
BRAKES
FORK
TOP VIEW
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE