Manual

BASIC MARKER OPERATION

Base Firing Modes

Your GTI Rampage board comes preprogrammed with the most optimal setting for your marker. Simply turn on

your marker and go play! For users who prefer to personalize their markers, the GTI Rampage board features sev-

eral setpoints to fully customize your marker’s performance. The table below describes each of the Marker Control

Setpoints, its corresponding LED color, the default value and the minimum and maximum for each setpoint.

Mode LED Display Description

1) Semi Automatic Solid Red Fires 1 shot per each trigger pull.

2) Burst Solid Blue Fires x shots per each trigger pull (x = the

Burst Mode Rounds value).

3) Reactive Solid Purple Fires (x) shots for each trigger pull and trigger

release. (x = the Reactive Rounds value).

4) Full Automatic Solid Green Continues to fire as long as the trigger is held.

5) Turbo Plus Fast Red Flash Fires (x) Semi-Automatic shots (x = the Turbo

Plus Trigger pulls value) then ramps to 1-shot

Reactive Mode. Returns to Semi-Automatic after

1 Second of no activity.

6) Rampage Fast Blue Flash Fires Semi-Automatic until a (x) trigger-per-

second pull rate (x = the Rampage Trigger

Rate value), then transitions to 2-shot Burst

Mode. Maintains the 2-shot Burst Mode until a

(2x) trigger-per-second pull rate (2x = the

Rampage Trigger Rate value * 2), then

transitions to 2-shot Reactive Mode. Returns to

Semi-Automatic after 1 Second of no activity.

7) PSP3 Fast Purple Flash Three shots in Semi-Automatic then transitions

to 3 Round Burst. Returns to Semi-Automatic

after 1 Second of no activity.

8) NXL Fast Green Flash Semi-Automatic for the first 3 shots, then Full

Automatic on the 4th pull and hold. Resets to

Semi-Automatic after 1 second of no Activity.

Manual_Piranha_6.0_eng_fr_sp.qxp 2/6/08 5:03 PM Page 23