Manual

maintenance and reassembly
12
2. Before it stops sliding forward, push the Sear Release Slide button forward. See Figure 22. The Sear Release
Slide button is located on the left side of the marker near the top of the left grip panel. Continue to press
assembly into marker. Pushing the button allows the bolt/hammer
assembly to slide easily the rest of the way into the marker.
3. Field strip pin must be inserted into the left side of the marker.
4. After reassembly, follow the procedures in this manual for adding air
system, loader, and paintballs.
Figure 12
Figure 21
Figure 13
Figure 14
Figure 15
Figure 16 Figure 17 Figure 18
Figure 19 Figure 20
Figure 22 Figure 23 Figure 24
Manual_Piranha_6.0_eng_fr_sp.qxp 2/6/08 5:03 PM Page 13