Manualshelf

User Manual

ManualsBrandsPipishell ManualsElectronicsFull Motion TV Monitor Wall Mount Bracket Articulating Arms Swivels Tilts Extension Rotation for Most 13-42 Inch LED LCD Flat Curved Screen TVs & Monitors, Max VESA 200x200mm up to 44lbs by Pipishell
12345678
70mm
ø10mm
5
Step 3A Wall Plate Install (Concrete Wall)
3A-1
3A-1
3A-2
These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or
wood studs.
A3
Anchor
CAUTION :
A3
Position the wall plate at your desired height,
level the wall plate and mark the pilot hole
locations.
Drill pilot holes
Install wall plate using lag bolts A1, washers A2 and anchors A3.
Tighten the lag bolts until they are pulled firmly against the wall plate.
Drill 2 pilot holes using a 25/64 in.(10 mm)
diameter drill bit. Make sure the depth is not
less than 2.75in. (70mm)
25/64 in.(10 mm)
Socket Wrench
A1
A2
A3
01