Product Specs

+4db.Example:Modify the Transmit Power is 01: Writing the corresponding value in the place of "Write

new value"(Figure 22). After finished Click“Done”toexit.At this time it can display the new Transmit

Measured Power in the place of "Read again" (Figure 23). Please pay attention:You should modify

transmit power according to the actual needs,"09 --- +4db" corresponds to the maximum power, the

signal transmission distance can up to 100 meters, but the battery life will be relatively short.

Figure 21 Figure 22 Figure 23

Wellcore Technology Co., Ltd

WELLCORE○RiBeaconW91 Series

2.11 Broadcast frequency revise

"Broadcast Frequency"is a (2 characters) HEX value,the default value is 0A (Figure24).The

Broadcast Frequency can be regulated from 0.1second to 10 seconds: 01 (0.1 seconds); 05 (0.5

seconds)...... 0A (1s); 64 (10 seconds) Example:Modify the Broadcast Frequency is 0.5 seconds:

Writting the "05" in the place of "Write new value"(Figure 25). After finished Click “Done”to exit. At