Product Manual

Verify the Conductor Pinpointed

Mark the spot where you have pinpointed the line and check

the direction by twisting the receiver left and right to get the

strongest signal.

Now place the transmitter on the mark, in-line with the conduc-

tor, and trace the conductor back to its source.

Trace the Conductor’s Path

When satisfied that you’ve found the target conductor, begin

walking away from the transmitter, tracing the path of the con-

ductor by sweeping the antenna left and right. Always keep the

antenna level and listen for the LOW-HIGH-LOW sound change.

Trace as far as necessary adjusting the sensitivity control to

maintain a solid, non-beeping tone.

Weak or Confusing Signal

When the sensitivity control is fully clock-wise or the tone be-

comes jittery or unclear, reposition the transmitter at the last

clear location and continue tracing.