Product Manual

15
Set the sensitivity to its maximum, fully clock-
wise.
Sweep the Mag Horn left and right as you slowly
move forward in a line along the fence or building.
Moving forward in small increments will prevent
passing over the target.
When you are over a ferrous object the signal
output will
drop dramatically.
When this happens the object has been located
at approximately 1 ½” from the end of the probe.
Moving the probe even slightly from this position
will create an immediate increase in signal.
5 Maintenance
The Mag Horn does not require routine mainteance
other than keeping fresh, charged batteries installed.
based on the battery manufacturer’s requirements
to prevent corrosion in the battery chamber.