Instructions / Assembly

PART DESCRIPTION QTY
G 1/2” TEE 3
H 90° ELBOW 2
I 45° ELBOW 1
J1 36” WOOD SHELF (FOR 36” SHELF) 1
J2 24” WOOD SHELF (FOR 24” SHELF) 1
K WOOD SCREWS 8
L SCREWS / ANCHORS 12
# 370MWDSH24BB, 370MWDSH24RG, 370MWDSH24TB, 370MWDSH24SC,
370MWDSH36BB, 370MWDSH36RG, 370MWDSH36TB, 370MWDSH36SC,
24” AND 36” PIPE WARDROBE RACK KIT
WITH WOOD SHELF
ID: 23695
PII# PII370MWDSH2436 — 120447
PART DESCRIPTION QTY
A 1/2” FLANGE 5
B1 12” NIPPLE (FOR 36” SHELF) 2
B2 8” NIPPLE (FOR 24” SHELF) 2
C 10” NIPPLE 1
D 4” NIPPLE 4
E 2” NIPPLE 2
F 1/2” CLOSE NIPPLE 1
STEP 1
(x2 — on both sides)
STEP 2
(x2 — on both sides)
STEP 3 STEP 4
STEP 6STEP 5
• Hold assembled rack against the wall (see image below). Using a level, make sure
rack is level. Mark location of holes on flanges with pencil for mounting to wall.
• Using stud finder, locate and mark wall stud if found.
A) If a wall stud is present, attach flange to wall with included screws.
b) If no wall stud is present:
• Drill pilot holes in wall using ¼” drill bit.
• Insert anchor fully into pilot hole using hammer and Phillips screwdriver
as needed.
• Attach flange to wall using included screws.
EASY INSTALLATION:
RECOMMENDED TOOLS FOR INSTALLATION
E
D
D
B1/B2
H
G
G
C
I
F
A
A
A
A
A
K
L
STEP 7
J1/J2
K
ASSEMBLED RACK