8-Inch Towel Bar Assembly Instructions 172 5718BK For more ideas, tips and techniques go to www.pipe-decor.
Parts List: A 2pcs - 3/8” FLOOR FLANGE B 2pcs - 3/8” x 1 1/4” CONNECTOR C 2pcs - 3/8 ” CAP D 2pcs - 3/8” TEE E 1pc - 3/8” X 16.5” CONNECTOR F 2pcs- 3/8” x 2” CONNECTOR G 8pcs - #10 X 1 1/4” FLAT PHILLIPS HEAD WOOD SCREWS H 8pcs - #10 PLASTIC TOGGLE WALL ANCHORS (use for hollow wall application only. Not necessary if attached directly to studs.
Hand assemble towel bar first keeping the connectors slightly loose prior to mounting on the wall. C B D E D F B C F G G G A A Place the towel bar on the wall and mark where the flange holes will be. Drill the holes, insert the plastic anchors then return the towel bar to the wall. Align the flanges, tighten as needed then permanently mount. 1 2 3 H Drill 5/16” pilot holes per flange For more ideas, tips and techniques go to www.pipe-decor.
