Use and Care Manual

3 / 4
3. The Heat Sensor and the Control Unit are factory paired. If the distance from the top of the
range to the Heat Sensor is greater than 24” but less than 36”, please refer
to the SmartRange User Guide for adjustments to the Heat Sensor’s sensitivity level.
4. If the distance from the top of the range to the Heat Sensor is greater than 36” please
contact your Pioneering Technology representative for custom installation assistance.
STEP 2 - INSTALLING THE CONTROL UNIT
Turn off power at the electric breaker. Pull out the stove and disconnect the stove’s power cord
from power outlet. Plug range into the Control Unit and plug the Control Unit into the power outlet.
Return stove to original position.
Control Unit
STEP 3 - TESTING SMARTRANGE
1. Restore power at the breaker panel. Wait for Control Unit to emit a ringing sound (approx.
30 seconds), then press and hold the Heat Sensor cover until it emits a beep.
2. Control Unit will emit a ringing sound (approx. 15 seconds). After a moment, the Heat
Sensor will emit an alarm signal. When the alarm signals, press Heat Sensor once.
3. Range is now operational. The installation is complete you are ready to cook safely.
NOTE: SmartRange is not a substitute for smart cooking behaviour.
NEVER LEAVE COOKING UNATTENDED!
SMARTRANGE INSTALLATION MANUAL