Installation Guide

TROUBLESHOOTING
1. Issue: The Heat Sensor does not respond (green light should illuminate) when pressing
the cover.
Resolution: Check that the red battery disconnection tab has been removed.
2. Issue: The test alarm does not reset.
Resolution: First, try another test alarm and wait for ve seconds before resetting. If the
test alarm still does not reset, the Heat Sensor and the Control Unit pairing must
be carried out again. (See Chapter 3.3 of Reference Manual that comes in the box
with the product. The Reference Manual is also available online at www.pioneeringtech.com
and reference any other info to provide the specic location of where it is located.)
The Heat Sensor and the Control Unit are factory paired. If an unpaired Heat Sensor is being used,
please contact your Pioneering Technology representative for custom installation assistance.
CUSTOM INSTALLATIONS
Custom Installations are required when:
• Ranges that are wider than 36”;
• Where the distance between the range and rangehood or OTR is less than 18” or greater
than 36”; or
• Where there is no rangehood or OTR and the Heat Sensor must be secured to a wall.
For assistance with a custom installation, or for assistance with any installation related questions
please contact your Pioneering Technology representative or email us at: [e-mail]
or call us directly at 1.800.433.6062.