Operation Manual

9
English
Using the remote control
The remote has a range of about 5 m (17 ft.) at an angle of about 30° from the remote sensor.
Keep in mind the following when using the remote control:
30°
30°
• Make sure that there are no obstacles between
the remote and the remote sensor on the unit.
• Remote operation may become unreliable if
strong sunlight or fluorescent light is shining
on the unit’s remote sensor.
• Remote controllers for different devices can
interfere with each other. Avoid using remotes
for other equipment located close to this unit.
• Replace the batteries when you notice a fall
off in the operating range of the remote.
3. Connect DC Power
• Connect the AC adaptor’s DC plug to the DC IN jack on the back panel. Then connect the
power plug on the other end to the power outlet.
• Use only the AC adapter included in this package, do not use the power adapter of different
specification.
Before Start
DC IN
5 m (17 ft.)