Instruction Manual

Connections
For active full-range speaker system
CAUTION
Make your initial connections with all the equipment powered
off and ensure all the main volume controls are turned down
completely.
1. Connect one end of a signal cable to the Output Left/Right on your
mixer (with a stereo jack or XLR connector) and connect the other
end of the cable to the Line Input (COMBO) on your active speaker
(with a stereo jack or XLR connector).
2. Connect the power cord to a mains supply.
3. Turn on your mixer first, then the active speakers.
4. Turn up the volume control of the speakers.
5. Use the PFL function on the mixer to get the proper input level, and
adjust the Main Mix Level control to reach the desired output level.
6. When finished, turn off your active speakers first, then the mixer.
Signal Cable Signal Cable
Right
Main Mix
Output
Left
Main Mix
Output
Tripod
Mount
Tripod
Mount
Mixer
Active subwoofer and active satellite speaker
CAUTION
Make your initial connections with all the equipment powered
off and ensure all the main volume controls are turned down
completely.
1. Connect one end of a signal cable to the Output Left/Right on your
mixer and connect the other end of the cable to the Line Input on
the corresponding (left or right) active subwoofer.
2. Connect one end of another signal cable into the Link Left/Right or
Out Left/Right of the active subwoofer, and connect the other end
to the Line Input Left/Right of the active satellite speaker.
3. Connect the power cord to a mains supply.
4. Turn on your mixer first, then the active speakers.
5. Turn up the volume control of the active speakers.
6. Use the PFL function on the mixer to get the proper input level, and
adjust the Main Mix Level control to reach the desired output level.
7. When finished, turn off your active speakers first, then the mixer.
Line
Input
Pole
Main Out Left
Line In
Left/Mono
Subwoofer
DJ Mixer, Etc.