XDP-20 HIGH RESOLUTION AUDIO PLAYER Music Streaming Balanced Ja En Fr Es It De Sv Ru Ct Cs 取扱説明書 Instruction Manual Mode d’emploi Manual de instrucciones Manuale di istruzioni Bedienungsanleitung Grundläggande bruksanvisning Руководство по эксплуатации 使用手冊 使用手册
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Table of Contents Before Start Before Start ............................................................ 2 What's in the box ..................................................... 3 Part Names ............................................................ 4 Part Names ............................................................. 4 Initial Setup ........................................................
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others What's in the box 1. Main unit (1) 2. micro USB cable (1) 3. Protective film (1) This protects the main unit. Peel off the temporary film on the display first, then attach this film. 1 0 Quick Start Guide (1) * This document is an online instruction manual. It is not included as an accessory.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Part Names Part Names Library Line Out Online Balanced Best Mix_01 4 1. Status bar 2. Library: Tap to display the tracks copied from your computer (P14). 3. Tap when using balanced headphones and switch between the "Balanced" and "ACG" modes.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 13.Play/pause ( ) button: Play or pause tracks. Press and hold to lock operations on this unit. To unlock, press and hold again. 14.Skip ( ) button: Skip to the beginning of the track or to the previous track. Press and hold to rewind the track quickly. 15.micro SD card slot 1 16.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Turning the power on and initial settings Initial Setup Initial Setup starts automatically 1 2 3 1. The battery is not charged at the time of purchase. Charge the unit with the supplied micro USB cable before use. Connect so the wider side of the plug is down when inserting into this unit's micro USB port. The recharging mark is displayed at the top right of the screen when recharging.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others ∫ 1. Passcode the connections are complete. Set the pass code used to protect this unit. When you set a pass code, the pass code screen is displayed when the power is turned on or when restoring from display off. You should create a pass code to protect your account if you are going to use a network service.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Copying music with "X-DAP Link" Playback You can copy music files stored on your computer to the built-in storage on this unit or to a micro SD card in this unit, then listen to the music through the "Library" (P14). You can copy either using the data copying software "X-DAP Link" or by dragging and dropping (P13). 0 X-DAP Link is compatible with Windows® 10 (32bit/64 bit), Windows® 8/ 8.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 3. Start X-DAP Link. The following types of screens are displayed when you start it. X-DAP Link e -onkyo music Folder onkyo music Title Artist Album Genre Format on the iTunes version. For details, see the operating instructions for iTunes. 2. A list of music files is displayed in the center of the screen when you select it.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others If the copy destination was selected by clicking 4, click 8 in the central column, and if 5 was clicked to select the copy destination, click the check button 9 in the column on the right. Mix_05 Artist B Best Mix Jazz 00:04:42 MP3 5.40 MB Mix_06 Artist B Best Mix Jazz 00:03:54 MP3 4.49 MB Mix_07 Artist B Best Mix Jazz 00:04:38 MP3 5.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others To back up: 1. Connect this unit to a computer with the supplied micro USB cable. Screen "Change to USB Mass Storage Mode?" is displayed, so tap "Yes". 2. Start X-DAP Link. 3. When you press 1 at the bottom left of the screen, the "Storage select" screen is displayed. 5. Drag and drop the music files you want to add to the playlist to the playlist you have created.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 5. When backing up is complete, the date and time of the backup and the playlist file are added to the left of the screen. 4. Select the storage destination to restore the playlist file at 6, then click "OK" at 7. 0 Irrespective of the storage selected as the restore destination, the playlist is restored automatically as a playlist for this unit.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Dragging and dropping to copy music 1 You can copy music files stored on your computer to the built-in storage on this unit or dragging and dropping to a micro SD card in this unit, then listen to the music through the "Library" (P14). 0 To copy to a micro SD card, insert a micro SD card into the card slot (P5). 0 When removing the micro SD card, unmount the micro SD card before removing it (P32).
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Listening to music from the "Library" 1 2 3 Library Folders Library Line Out Online Balanced 2 Best Mix_02 3 Best Mix_03 4 Best Mix_04 3:23 5:02 Album Artists Displays a list of play lists you have created (P16). ∫ Playing Music with the "Library" Albums Displays by album. 1.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others ∫ The play screen Screen B Screen A 5 9 12 1 2 6 3 7 13 8 14 10 11 status bar on the screen when this is on. 12.The track being played is added to the play list (P16). 13.Repeat mode Tap to change the mode: 1 track repeat‚ # all track repeat ‚# no repeat. " " is displayed on the status bar on the screen when 1-track repeat is set, and " " is displayed for all-track repeat.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Creating a play list 1 2 Library Folders 3 4 Playlists New Playlist 1 Playlists Ar sts 3 Album 16 To change the name of a play list: Tap " " at the top right of the play list whose name you want to change, then tap " ". ∫ Editing tracks in a play list Tap "Playlists" in the list of categories in the "Library" to display the list of play lists. Tap the play list you want to edit next.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Using network services 1 2 Online Library Line Out Online Balanced You can use network services such as TuneIn Radio, DEEZER and TIDAL by connecting this unit to a network that has an internet connection. 0 There needs to be a Wi-Fi connection in order to play network services. 0 Depending on the network service, the user may need to register from their computer first.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Connecting BLUETOOTH® 1 2 Library Line Out Online 3 Settings Bluetooth Wi-Fi Bluetooth Bluetooth Not Paired Balanced Brightness Available Devices : Balanced Output Select Line Out Mode You can listen to music wirelessly by using BLUETOOTH wireless technology enabled devices such as headphones or speakers. Reception is possible over a distance of 10 m with a clear line of sight.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Line Out 1 2 Library Line Out Online Balanced You can connect a headphone amplifier or D/A converter, for example, that has line input. You will need a headphone plug (commercially available) to connect to this unit. Make sure you have the correct type of headphone plug for the jack of the device you are connecting. Connecting a device 1.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others USB Output 1 2 Library Line Out OTG Cable We plan to provide for the USB Output function through firmware updates for this product. You can connect a headphone amplifier or D/A converter, for example, that has a USB connector. You will need a USB OTG (OnThe-Go) cable (commercially available) to connect to this unit.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Advanced Setup Various settings 1 2 Settings Wi-Fi Library Line Out Online Balanced Bluetooth Brightness Tap to make settings for Wi-Fi and BLUETOOTH, settings for audio output, pass code settings, software updates, and a variety of other settings. 1. Tap " " in the home screen. 2. Tap the item you want to set. ∫ Wi-Fi "On": Connection to a network via Wi-Fi is enabled.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others or "Variable". When "Variable" is selected, volume can be adjusted on this unit. If you select "Fixed", adjust the volume on the connected external device. "Off (default value)": Line output is not enabled initialize, after tapping the micro SD card to be initialized, tap "Format" - "Confirm".
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others deleted. 0 You should create a pass code to protect your account if you are going to use a network service. ∫ Language Select the language you want to use. Flick the list of languages up or down, then tap the language you want to use.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Audio Adjust 1 Tap to set to your preferred sound quality. 1. Tap " " in the home screen. 2. Tap the item you want to set.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 If you change the lock range and the sound is interrupted, adjust to the Normal or Wide ends.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Customizing the Home screen 1 By pressing and holding the buttons in the home screen of this unit, you can change the buttons displayed to ones for features you prefer. 0 "Library" and "Online" cannot be changed. 2 Select a Short cut button Changing shortcut buttons Repeat Library Line Out Online Balanced Shuffle Settings Wi-Fi Bluetooth 26 1.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Software Update The updating function on this unit How to update Updating the Firmware via Network This unit has functionality to update the software over a network or a micro SD card. This enables us to make improvements to a variety of operations and to add features. There are two methods for updating the firmware: via network and via micro SD card.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others PC and unzip. 3. Copy all unzipped files and folders to the root folder of a micro SD card. 0 Make sure to copy the unzipped files. 4. Insert the micro SD card into a card slot (either 1 or 2) on this unit. 5. Tap " " in the home screen. 6. Tap "Software Update". 7. After tapping "Update Now", the software update starts when you tap "via SD Card".
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Supplementary Information Supplementary Information Due to software updates after you make your purchase or software changes during production of the product, there may be additions or changes to the settings and operation available compared to what is in the instruction manual. For information about the settings and operations that have been added or changed, see the following references.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Entering text Others 1 4 2 @-_/ abc 0 This unit enables input of the alphabet, symbols, and numbers only. def 123 ghi jkl mno pqrs tuv wxyz 5 3 6 .,!? 30 ʻ”:; aA 1. Moves the cursor. 2. Enters a space. 3. Tap to enter text. 4. Removes a character on the left of the cursor. 5. Change the type of text. 6. Confirm the text you entered. 7. Switches between upper and lower cases.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others General Specifications Display 2.4-inch, 240 screen 320 dot resolution, capacitive touch Gain switch Low/Normal/High Internal memory 16 GB (including system area) External memory 2 micro SD card slot (maximum 256 GB 1 micro USB port (B type, combined charging and data transfer) 2) Network Section Wireless LAN: IEEE802.
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Cautions for use ∫ If operation becomes unstable American models only) 0 The issue may be fixed by restarting this unit. Press and hold the power button on this unit for 10 or more seconds to restart the unit. (The settings in the unit are maintained.) You can confirm information related to authorizations using the following procedure: 1. Tap " " in the home screen. 2. Tap "Device Information".
> Before Start > Part Names > Initial Setup > Playback Advanced Setup | Supplementary Information | Others License and Trademark The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Windows® 7, Windows® Media, and the Windows® logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance®. iTunes is a trademark of Apple Inc., registered in the U.
