User guide
8
En
Operation
Connecting the input/output terminals
! Connect the power cord after all the connections between devices have been completed.
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Refer to the operating instructions for the component to be connected.
! Be sure to use the included power cord.
! This product satisfies electromagnetic noise regulations when it is connected to other equipment through shielded cables (with Ferrite - cores
attached) and connectors.
Use only the furnished accessory connecting cables.
Rear panel, front panel
MIC
BOOTH
OUT
MASTER
OUT 2
L
R
L
RRL
MASTER OUT 1
PHONO LINE
PHONO 2 / LINE 2
L
R
LINE
AUX IN
0 dB
L
R
12 dB
USB
AC IN
SIGNAL
GND
PHONO LINE
PHONO 1 / LINE 1
L
R
Rear panel Front panel
R
L
R
L
Microphone
Power amplifier
(for booth monitor)
R
L
R
L
DJ player
Portable audio
device
R
L
Headphones
To power outlet
Analog player
DJ
software
Computer
1
R
L
Power amplifier,
powered speakers, etc.
Power amplifier,
powered speakers,
etc.
2
1 To maintain performance, use with this unit and the computer connected directly using the included USB cable.
2 Be careful not to accidentally insert the power cord of another unit to [MASTER OUT 1] terminal.
Connecting by wireless LAN
With this unit, a mobile device supporting wireless LAN connections
can be connected directly without using router, etc., to hold DJ perfor-
mances using the mobile device application (remotebox).
This unit does not support wireless LAN connection via a router.
USB
CD
MIDI
AUTO
BEAT LOOP
TRACK SEARCH
PLAY/PAUSEPLAY/PAUSE
HOT CUE
BEAT LEVEL/DEPTH
CUE
TIME
−
AUTO CUE
−
UTILITY
INFO
QUANTIZE
BACK
−
TOP
MODE
ABC
−
AUTO
TAP
VINYL MODE
MASTER
TEMPO
TEMPO
0
TEMPO
WIDE
6 / 10 / 16 /
S
E
A
R
C
H
WLAN
CUE MASTER
HEADPHONES
MIXING
EQ
LOWHI
COLOR
LOWHI
BOOTH MONITOR
0
NOISE PITCH
CRUSH FILT ER
SOUND COLOR FX
LOW
+9
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
DECK1
PHONO1/LINE1
THRU
COLOR
LOWHI
HI
+9
DECK2
PHONO2/LINE2
AUX
LEVEL
0
MIC
LEV
EL
0
CH1 CH2
CROSS F.CURVE
AUX
ON/OFF
MIC
ON/OFF
USB
CD
MIDI
AUTO
BEAT LOOP
TRACK SEARCH
HOT CUE
BEAT
SELECT PUSH
CUE
TIME
−
AUTO CUE
−
UTILITY
INFO
QUANTIZE
BACK
−
TOP
MODE
ABC
MINMAX
LEVEL/DEPTH
−
AUTO
TAP
VINYL MODE
MASTER
TEMPO
TEMPO
0
TEMPO
WIDE
6 / 10 / 16 /
DISC
DISC
DELETE
S
E
A
R
C
H
SELECT PUSH
MINMAX
PHONES
BEAT FX
TRANS ECHO ROLLFLANGER
CH1 CH2
SYNC
MASTER
SYNC
MASTER
CH1 CH2MASTER
BEAT FX
TRANS ECHO ROLLFLANGER
SHIFTSHIFT
LEVEL
0
TRIM
+9
HI
+9
MID
+9
LOW
+9
MID
+9
TRIM
+9
MASTER
LEVEL
0
−
USB
STOP
5V 500m
A
DELETE
CALL CALL
1 Press the [STANDBY/ON] button.
Turn on the power of this unit.
The [STANDBY/ON] indicator lights green.
2 Press the [INFO(UTILITY)] button for over 1 second.
The [UTILITY] screen is displayed.
3 Turn the rotary selector, select [WLAN SETTING], then
press the rotary selector.
For details on the [WLAN SETTING] item, see this product’s operating
instructions.
4 Turn the rotary selector, select [MODE], then press
the rotary selector.
5 Turn the rotary selector, select the mode you want to
set, then press the rotary selector.
— [WLAN ENABLE]: Activates the wireless LAN function.
— [WLAN DISABLE]: Turns the wireless LAN function off.
6 When [APPLY CHANGES?] appears on the main unit
display, turn the rotary selector to select [YES], then
press the rotary selector.
After this, make the settings for connection in the ENABLE mode.