Operation Manual

7 Using the Tape Deck
37
2 Select the source you want to record.
For example, if you want to record from the tuner, press TUNER, and tune
into a station.
If you are recording from another component, set it up ready for playback.
3 Press TAPE REC.
The recorder goes into record-pause mode.
4 Press TAPE to begin recording.
If you’re recording from a component that requires you to start playback (a
turntable or another cassette deck, for example), start playback here.
To pause recording, press
TAPE REC. To resume, press again.
5 When you want to finish the recording,
press & .
Resetting the Tape Counter
The tape deck has a digital tape counter which resets to zero each time you load a
cassette or switch the power off. You can reset the counter to zero at any other time
from the menu.
1 Press MENU and select COUNTER RESET.
Remember: switch between menu options using the $ and › buttons;
select the option by pressing SET.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL
REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU SET
4
¢
After pressing SET, the tape
counter returns to zero
The display shows the tuner
tuned to station memory 12
Once recording starts, the
recording indicator stops
flashing and lights steadily
The recording indicator
disappears
Changing the Display
You can choose to display various kinds of when using the tape deck. Switch between
them by pressing the DISPLAY button.
TAPE COUNTER - displays the tape counter
CLOCK - displays the current time and date
CALENDAR - displays the current date
DIMMER SELECT - adjusts the display brightness (see page 43)
Clock display
Tape counter display
Calendar display
The recording indicator flashes