Operation Manual

5 Using the CD Player

Using the Menu System

Access to many of the less commonly used functions of the system is via a menu

system. Each component (CD player, tuner, tape deck, auxiliary, and MD recorder) has

it's own set of menu options, but access to all of them is from the MENU button. If

you worked through the last section, you'll have already used the menu system when

you switched between mono and auto FM reception, or switched Dolby NR on/off.

Pressing

MENU displays the first menu option for the component you're currently

using. You can display the next option by pressing ›, or the previous one by

pressing $. The menus 'wrap around', so once you get to the end of the list,

pressing › again takes you back to the first item.

To select the menu option currently displayed, press the

SET button. This will take you

to a further 'sub-menu', which may simply consist of two settings (like FM mono and

auto, or Dolby NR on and off), or may have more choices. Either way, choose between

different options with the $ and › buttons, and select them by pressing SET.

If you make a mistake while in the menu system, simply press & to cancel and exit.

The CD menu

The CD menu gives you access to the following functions:

CD PROGRAM - Specify the track order on a disc (page 24)

CD REPEAT MODE - Set the current track or disc to repeat play (page 25)

CD RANDOM PLAY - The player plays tracks in a random order (page 26)

The tuner menu

The tuner menu gives you access to the following functions:

STATION MEMORY - Memorize station frequencies for quick recall (page 27)

STATION NAME - Give station memories meaningful names (page 28) (You'll only

see this option if you're in Station mode - see page 27.)

FM AUTO/MONO - Specify the FM reception mode (page 19) (You'll only see this

option if you're in FM reception mode.)

The tape menu

The tape menu gives you access to the following functions:

REVERSE MODE - Play a single side, or both sides of a tape automatically (page 33)

COUNTER RESET - Set the tape counter to zero (page 37)

DOLBY NR - Switch the Dolby Noise Reduction on or off (page 21)

AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/

CHARACTER

CANCEL

REC

$

! —

›

⁄

VOL

STANDBY/ ON

MENU SET

¢