Operation Manual

% Touch [Mute Input/Guide] in Initial
menu.
Each touch of [Mute Input/Guide] changes
the settings as follows:
! Mute — Muting
! ATT — Attenuation
! Normal — Volume does not change
p Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the na-
vigation guidance is ended.
p Even when you receive a phone call, naviga-
tion voice guidance cannot be attenuated
or muted. Use [Volume] to control the navi-
gation voice guidance volume.
Other Functions
Selecting the video for “Rear
display”
You can choose either to show the same
image as the front screen or to show the se-
lected source on the “Rear display”.
p The navigation system automatically
switches the colour system (NTSC/PAL) for
each video and outputs the video on the
“Rear Display”. To correctly output each
type of video on the “Rear Display”, we re-
commend using a “Rear Display” with a
function to automatically switch the colour
system (e.g. AVD-W7900).
1 Press AV button to switch AV operation
screen.
2 Press MENU button and then touch
[REAR SCREEN].
Each touch of [REAR SCREEN] changes the
settings as follows:
! Mirror — The video on the front screen of
the navigation unit is output to the “Rear
display”
! DVD — The video and sound of the DVDs
are output to the “Rear display”
! AV1 — The video and sound of AV-1 are
output to the “Rear display”
! AV2 — The video and sound of AV-2 are
output to the “Rear display”
p When [Mirror] is selected, the following re-
strictions are applied to “Rear display”.
— When selecting [Rear View] in the map
display, nothing is displayed.
— All sounds cannot be output for “Rear
display”.
— The map screen navigation images out-
put to the “Rear display” differ from
standard NTSC format images. There-
fore, their quality will be inferior to the
images that appear on the front screen.
p When [DVD] is selected, the following re-
strictions are applied to “Rear display”.
— When a CD or MP3/WMA/AAC disc is
set in the built-in DVD drive, nothing is
output.
p When [AV1]or[AV2] is selected, the follow-
ing restrictions are applied to “Rear dis-
play”.
— The “Video image” and sound are output
only when AV-1/AV-2 has both video
and sound.
— The “Video image” and sound are output
only when the appropriate setting on
[AV1 Input]or[AV2 Input].
Setup adjustments
1
1 System menu display
= Refer to step 3 in How to Display each
Menu on page 76.
Setting the video input
You can switch the setting according to the
connected component.
Customising the AV Source Setting
Engb
125
Chapter
09
Customising the AV Source Setting