Operation Manual

15
Chapter 1 Basic OperationNAVI/AV
Chapter 1
Basic Operation
Flow from Startup to Termina-
tion
• If the programme is not installed, see page
121 and install the programme.
At first, please confirm the positions of the follow-
ing features using the “Hardware Manual”.
• Disc loading slot
• NAVI/AV button
• NAVI MENU button
1 Start the engine.
After some time, the navigation opening
screen comes on for a few seconds. Then, a
message screen is displayed.
❒ If the disc is not set, the message asking to
insert the disc appears. After you set the
disc correctly, your navigation system
starts up.
2 Insert the Pioneer DVD map disc to the
disc loading slot.
3 Press the NAVI/AV button to switch to
the navigation map screen.
Pressing the NAVI/AV button switches
between the navigation map screen and the
audio screen.
4 Check the details of the cautionary mes-
sage and touch “OK”.
You can operate the navigation system by
touching keys displayed on the screen.
If the route is already set, it changes to route
guidance mode. The map of your surround-
ings is displayed.
➲ How to read the current position screen ➞
Page 24
➲ Setting the time ➞ Page 122
➲ Starting the operation with voice com-
mands only ➞ Page 56
❒ Touch keys which are not available at this
time are greyed out.
❒ Be sure to touch the touch keys with your
finger. Touch keys cannot be operated by a
pen or similar object.
❒ When the microphone is connected and
automatic voice recognition is set, you can
operate the navigation system by voicing
“OK” instead of touching the “OK”.
5 Press the NAVI MENU button.
Displays the main menu.
6 Allows you to assign a destination and
begin route guidance.
➲ Specifying the address and searching the
destination ➞ Page 16
➲ Searching the destination by map ➞
Page 29
➲ Other search methods ➞ Page 31 to 34
7 Turn off the vehicle engine.
This navigation system is also turned off.
❒ Until the vicinity of the destination is
reached, the set route will not be deleted
even if the engine is turned off.