User manual

9
9
30
Network quick setup guide
Connection method 1 | Connect a LAN cable
1
Connect the receiver and the router using a LAN cable.
2
Press the STANDBY/ON button.
The power to the receiver will be turned on.
3
Press the NET SERVICE button, and select Internet Radio.
Confirm that the cabled LAN operation mark is displayed.
Note
• If the cabled LAN operation mark is not shown, check that the LAN cable is firmly inserted
into both this receiver and the router.
• This receiver is shipped with DHCP settings turned “On”. If your router does not support
DHCP, please perform the settings manually. (A: Wired setting
on page 42)
• If “Empty” is displayed, there is a possibility that the router is not connected to the internet.
Check whether other connected devices, such as a computer, are able to use the internet. If
not, connect the router to the internet. Refer to the router’s user manual for details on how
to do so.
ANTENNA
A
L
LAN (10/100)
WLAN
ANTENNA
WAN
321
LAN
Internet
Router
Computer
This receiver’s rear
panel
LAN cable
(commercially
available)
Modem
STANDBY/ON
OPEN/CLOSE
SLEEP
TIMERDIMMER
SOUND
iPod/USB
CD
BT AUDIO
INPUT
Genres
Podcasts By Genre
Podcasts By Location
Countries
Internet Radio
Top Menu