Operation Manual
Other features09
20
En
Chapter 9:
Other features
Turn on/off automatically
You can set a time for automatic power on and off.
Note
• Make sure that you have set the clock before this setup.
1 In standby mode, press and hold
SLEEP/
TIMER
.
[TIMER ON] (time for auto power on) blinks.
2 Press
SLEEP/TIMER
.
The hour digits blink.
3 Press
/
to set the hour.
4 Press
SLEEP/TIMER
again.
The minute digits blink.
5 Press
/
to set the minute.
6 Press SLEEP/TIMER to confirm the time for
auto power on.
[TIMER ON] blinks.
• If you want to set the power-off time, press /
to select [TIMER OFF] (time for auto power off),
and then repeat steps 2-6.
7 Press
/
to select [
SOURCE
].
8 Press
SLEEP/TIMER
.
9 Select the input ([
DISC
], [
USB
], [
iPod
] or
[
FM
]) by pressing
INPUT
on the main unit or one
of the input function buttons on the remote
control.
• For the tuner source, you still need to press /
to select a programmed radio station.
•[iPod] can only be selected on the X-EM21.
10 Press
SLEEP/TIMER
.
The clock time is displayed.
• To deactivate the timer, press SLEEP/TIMER again.
• The power cannot be turned on while the timer is being
set. Finish setting the time, then turn on the power.
Setting the sleep timer
In the working mode, press SLEEP/TIMER repeatedly to select
a preset period (15, 30, 45, 60, or 90 minutes).
When the sleep timer is activated, [SLEEP] is displayed on the
upper-right corner of the main display.
• To deactivate the sleep timer, press SLEEP/TIMER
repeatedly until [SLEEPOFF] is displayed.
Routing audio from other devices
Through the AUX IN socket
1 Connect a stereo mini-plug cable
(commercially available) to
•the AUX IN socket on the front panel of the main unit,
and
• the headphones socket on the external device (for
example, an MP3 player).
2Press
AUX
on the remote control or
INPUT
repeatedly on the main unit to switch the source
to [
AUX IN
].
3 Play the external device.
X-EM21_SYXE8_En.book Page 20 Thursday, June 7, 2012 9:43 AM
601-EM2100-010.pdf 20 2012/7/5 11:25:06