Operation Manual

Using the dock (X-EM21 only)06
16
En
Chapter 6:
Using the dock (X-EM21 only)
You can enjoy audio from iPod/iPhone through this system.
Note
• No audio output from the PHONES socket in this situation.
• When operating directly on iPod/iPhone, do hold the iPod/
iPhone with the other hand to prevent loose connection.
• iPod/iPhone will not play automatically when docked if the
source is not selected as [iPod].
Compatible iPod/iPhone models
This system supports the following iPod and iPhone models.
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPod touch (1st, 2nd, 3rd, and 4th generations)
• iPod nano (3rd, 4th, 5th, and 6th generations)
• iPod classic
Some of the functions may be restricted for some models.
• This system has been developed and tested for the
software version of iPod/iPhone indicated on the website
of Pioneer.
(http://pioneer.jp/homeav/support/ios/na/)
(http://pioneer.jp/homeav/support/ios/eu/)
• Installing software versions other than the ones
indicated on the website of Pioneer to your iPod/iPhone
may result in incompatibility with this system.
Enjoying audio through the dock
Note
• The peak current through the dock connector is limited as
1 000 mA for iPod/iPhone. To avoid damage to your iPod/
iPhone and this system, securely load your iPod/iPhone as
indicated.
1Press iPod on the remote control or INPUT
repeatedly on the main unit to switch the source
to [
iPod ].
2 Remove the terminal cover from the dock.
3 Connect your
iPod/iPhone to the dock.
4 Play a track on your
iPod/iPhone .
Buttons Functions
 Start, pause, or resume playback.
DOCK MENU Access the playlist of iPod/iPhone.
/ Navigate through the playlist of iPod/
iPhone.
/ Skip to the previous/next track.
Press and hold to rewind or search
forward fast.
06_Use the dock.fm 16 ページ ２０１２年６月１３日 水曜日 午前１１時８分
601-EM2100-010.pdf 16 2012/7/5 11:25:06