Installation Guide

Indoor Unit Installation Location Selection

Follow the below best practices for selecting an optimal space for installation the indoor unit:

• DO NOT install the unit on a wall that is subject to vibrations.

• DO NOT install the system near sources of heat, steam, or flammable gases.

• DO NOT install the indoor unit in a location that is exposed to direct sunlight.

• DO ensure that the inlet and outlet vents are not obstructed. The system should be able to

output air all across the room.

• DO minimize the distance between the indoor and outdoor unit and install the unit in a

place where connecting the indoor and outdoor unit will be as simple as possible.

• DO install the unit on a strong wall and where it is easy to drain the condensate water.

• DO install the unit in a location where it will be easy to service the machine and perform

any necessary maintenance.

• DO obey the following tolerances depicted in the illustration below:



Page 22



Indoor Unit Installation Instructions

Indoor Unit

Installation

10-15 cm (4-6in)

or more

2.0 m (80 in) or more

10-15 cm (4-6 in)

or more

10-15 cm (4-6 in) or more