Troubleshooting Guide

113
5 Reactor How to remove the reactor
1)
Perform work of item
1,2
2)
U
nfasten the connector
between IPM and reactor.
3)
Remove two
screws of
cover of inductance, an
d
remove the
cover of
inductance
4)
Disconnect two pieces of
wires conne
cted from the
cover of inductance.
5)
Remov
e four screws of
reactor, and
remove the
reactor.
6 The 4-way
valve
How to remove the 4-way
valve
1)
Perform work of item
1,2.
2)
Extract refrigerant gas.
3)
Remove the electrical p
arts
from item 3.
4)
Remove fixing screw of
the
coil, and re
move the coil.
5)
D
etach the welded parts of
4-way
valve and pipe.
Screws of
cover of
inductance
Screws of
reactor
Coil
Welded
p
arts