Troubleshooting Guide
Table Of Contents
124
2)
Disconnect t
he fan motor
Connector(5p,white) from the
IPM board.
3)
Disconnect f
ollowing 8
pieces of
connection wire
s and
connectors between IPM and
other parts.
CN2(yellow)
CN1(red)
CN6(black)
CN
3(yellow)
U、V、W(black)
CN9(10p,white)
4) Remove the fixing screws
then remove the IPM board.
5)
Disconnect the
connectors and wires
connected from PCB and other
parts.
Connectors:
CN8: Discharge temperature sensor
DC Fan
Driver board