Troubleshooting Guide

Table Of Contents
2.3. Evaporator Disassembly
Note: Remove the front panel and electrical parts (refer to 2.1. Front Panel Disassembly and 2.2. Electrical
Parts Disassembly) before disassembling the evaporator.
Procedure Illustration
1) Disassemble the pipe holder located at
the rear of the unit (see Fig. 23).
2) Remove the 1 screw on the evaporator
located at the fixed plate (see Fig. 24).
Figure 23
Figure 24
Note: This section is for reference only. Actual unit appearance may vary.
Indoor Unit Disassembly 13