Troubleshooting Guide

Table Of Contents
Procedure Illustration
1) Remove the 5 screws, and release
two hooks, then remove the
electronic control box subassembly.
see Fig. 1).
Figure 1
Outdoor Unit Disassembly 17
Note: This section is for reference only. Actual unit appearance may vary.
3.2.2. Electronic Control Box Subassembly Removal (EW-3)
Scope of Models Covered:
YN018GMFI22RPE / YN024GMFI20RPD / YN024GMFI22RPE
Note: Electric control box cover
cannot be removed.