Troubleshooting Guide

Table Of Contents
Procedure Illustration
1) Turn off the air conditioner and the
power breaker.
2) Remove the screw of the big handle
and then remove the big handle
(1-3 screws) (see Fig. 1).
3) Remove the screws of the top cover
and then remove the top cover (3
screws). One of the screws is located
underneath the big handle (see Fig. 2).
Figure 1
Figure 2
Big Handle
Top Cover
Outdoor Unit Disassembly 10
Note: This section is for reference only. Actual unit appearance may vary.
3.1.2. Panel Plate Disassembly (PT-3)
Scope of Models Covered:
YN018GMFI22RPE / YN024GMFI20RPD
(Some Models) 3 Screws