Troubleshooting Guide

Table Of Contents
Procedure Illustration
1) Remove the bearing sleeve (see Fig. 25).
2) Remove the fastening screw (see Fig. 26).
3) Pull out the fan motor and fan assembly
from the side.
Figure 25
Figure 26
Indoor Unit Disassembly 31
Note: This section is for reference only. Actual unit appearance may vary.
3.4. Fan Motor and Fan Disassembly
Note: Remove the front panel, electrical parts and evaporator (refer to 3.1. Front Panel Disassembly,
3.2. Electrical Parts Disassembly, and 3.3. Evaporator Disassembly) prior to disassembling fan motor
and fan.