Troubleshooting Guide

Table Of Contents
Procedure Illustration
1) Disassemble the pipe holder located at
the rear of the unit (see Fig. 21).
2) Remove the 3 screws on the evaporator
located at the xed plate (see Fig. 22).
Figure 21
Figure 22
Note: This section is for reference only. Actual unit appearance may vary.
Indoor Unit Disassembly 29
3.3. Evaporator Disassembly
Note: Remove the front panel and electrical parts (refer to 3.1. Front Panel Disassembly and 3.2. Electrical
Parts Disassembly) before disassembling the evaporator.