Troubleshooting Guide

Table Of Contents
2.4. Fan Motor and Fan Disassembly
Note: Remove the front panel, electrical parts and evaporator (refer to 2.1. Front Panel Disassembly,
2.2. Electrical Parts Disassembly, and 2.3. Evaporator Disassembly) prior to disassembling fan motor
and fan.
Procedure Illustration
1) Remove the two screws and remove the
cover of the fan motor (see Fig. 28).
2) Remove the bearing sleeve (see Fig. 29).
Figure 28
Figure 29
Screws
Indoor Unit Disassembly 15
Note: This section is for reference only. Actual unit appearance may vary.