Troubleshooting Guide

Table Of Contents
WARNING
Electricity remains in capacitors even when the power supply is off.
Ensure the capacitors are fully discharged before troubleshooting.
1. Disconnect the connector from outdoor PCB.
2. Measure the resistance value of each winding using a multi-meter.
3. Check the resistance value of each winding in the following table.
Color of lead winding Normal Value
About 50Ω
Troubleshooting
41
8.6 EEV Check
Color of lead winding Normal Value
About 50Ω
Gray - Black
Gray - Red
Blue - Orange
Blue - Yellow
Red - Blue
Red - Yellow
Brown - Orange
Brown - White