Instruction Manual
153
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value Setting Details
Front Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Center 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Front Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Height 1 Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 1 Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Surr Back Right 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value Setting Details
Surround Left 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 10.0 ft/3.00 m Specify the distance between each speaker and
the listening position.
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.