Manual

114
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Setting Item Default Value Setting Details
Bluetooth Wakeup O󰀨
This function wakes up the unit on standby by
connecting a BLUETOOTH-enabled device.
"On": When this function is used
"O󰀨": When this function is not used
When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption
is minimized by automatically entering the
HYBRID STANDBY mode where only the
essential circuits operate.
This setting is xed to "O󰀨" if "Network/
Bluetooth" - "Bluetooth" - "Auto Input Change" is
set to "O󰀨".
Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can
be selected when the network function is activated.
12V Trigger
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V
TRIGGER OUT jack. Di󰀨erent settings can be set for each input selector. You can
enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack.
Setting Item Default Value Setting Details
BD/DVD O󰀨 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone 2": Output when "BD/DVD" is selected as
input source for Zone 2.
GAME O󰀨 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "GAME" is selected as input
source for the main room.
"Zone 2": Output when "GAME" is selected as input
source for Zone 2.
CBL/SAT O󰀨 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "CBL/SAT" is selected as
input source for the main room.
"Zone 2": Output when "CBL/SAT" is selected as
input source for Zone 2.
STRM BOX O󰀨 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "STRM BOX" is selected as
input source for the main room.
"Zone 2": Output when "STRM BOX" is selected as
input source for Zone 2.
HDMI 5 O󰀨 Set the 12V trigger output setting to each input.
"O󰀨": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.