User's Manual

39
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
To ARC TV
If the TV supports the ARC (Audio Return Channel) function (*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the
TV for connection.
• Another TV or projector can be connected to the HDMI OUT SUB jack. Switch
between MAIN and SUB using the HDMI MAIN/SUB button ( p16) on the
remote controller or "AV Adjust" ( p129). Note that this jack is not ARC-
compatible.
• If devices with di󰀨erent resolutions are connected to HDMI OUT MAIN jack
and SUB jack, images are output with the lower resolution.
Setup
• Settings are required to use the ARC function. Select "Yes" for "5. ARC Setup"
in Initial Setup (
p132). If "No, Skip" is selected, settings are required in the
System Setup menu after Initial Setup is completed. Press the
button on
the remote controller to display the Home screen, and select "System Setup" -
"Hardware" - "HDMI" ( p113) to make the following settings.
– Set "HDMI CEC" to "On".
– Set "Audio Return Channel" to "Auto".
• For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-
compatible TV is complete with one HDMI cable. To check if the TV supports the
ARC function, refer to the instruction manual of the TV, etc.
a HDMI cable
IN(ARC)
a
TV