User manual

Connecting your equipment
2
2
14
58
7
4
VSX-S310 connection diagram
Switching the speaker terminal
VSX-S510: When the The Speaker System setting (VSX-S510 only) on page 54 is set to SPB, each
press of the SP-A/B button will switch the SPAB used for playback: SP, SPA, SPB,
SPAB.
VSX-S310: Each press of the speaker button will switch the speaker used for playback: SP,
SPA.
When the speaker system is set to SP-B: Each press of the speaker button will switch the
speaker used for playback: OFF, A, B, AB.
When the speaker system is set to anything other than SP-B: Each press of the speaker button
will switch the speaker used for playback: OFF, A. For more details on the speaker system
please refer to The Speaker System setting (VSX-S510 only)
on page 54.
Press repeatedly to choose a speaker terminal option:
• SPA – Sound is output from the speakers connected to the A-speaker terminals
(multichannel playback is possible).
• SPB (VSX-S510 only) – Sound is output from the two speakers connected to the B-speaker
terminals (only stereo playback is possible).
• SPAB (VSX-S510 only) – Sound is output from the A-speaker terminals, the two speakers
in the B-speaker terminals, and the subwoofer. Multichannel sources are downmixed only
when the STEREO or STEREO ALC mode is selected for stereo output from A-speaker
terminals.
• SP – No sound is output from the speakers.
Note
• VSX-S510 only: The subwoofer output depends on the settings you made in Speaker Setting on
page 51. However, if SPB is selected above, no sound is heard from the subwoofer (the LFE
channel is not downmixed).
• All speaker terminals are switched off (SP) when headphones are connected. SPB can be
selected even when headphones are connected for VSX-S510.
LINE LEVEL
INPUT
LINE LEVEL
INPUT
FRONT
R L
SURROUND
R L
CENTER
PREOUT
SUBWOOFER
Center
Surround right
Front right
Front left
Powered
Subwoofer
Surround left