Manualshelf

Operation Manual

ManualsBrandsPioneer ManualsAudioVSX-S300-S
12345678910
Controls and displays
7
En
01
01
Remote control
The following buttons are not used with this receiver:
-
iPod USB, NETWORK, , , iPod CTRL
1
STANDBY/ON
Switches the receiver between standby and on.
2 Input function buttons
Use to select the input source to this receiver (page 18). This
will enable you to control other Pioneer components with the
remote control.
• Switch to one of the underlined devices to use the remote
control to operate that device. As for operating other
devices, the remote control codes for the Pioneer
products are preset. The settings cannot be changed.
3
Switches the remote to control the receiver. Also use this
button to set up surround sound (page 27) or Audio
parameters (page 24).
4 Receiver control buttons
Press first to access:
SLEEP – Press to change the amount of time before the
receiver switches into standby (30 min – 60 min – 90 min
– Off). You can check the remaining sleep time at any
time by pressing SLEEP once.
SP-AB – See Switching the speaker terminal on page 11.
DIMMER – Dims or brightens the display. The brightness
can be controlled in four steps.
STATUS – Switches the display of this unit.
-
The Pre Out setting and Up Mix function settings can be
checked depending on the input selected.
Press TUNER first to access:
DISP – Press to display the preset name (page 20).
Press BD or DVD first to access:
AUDIO – Press to change the audio stream/channel of
Blu-ray Disc/DVD.
DISP – Press to display information of a Blu-ray Disc/DVD.
5 Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
Press first to access:
TOOLS – Use to access the Audio options (page 24).
HOME MENU – Press to access the Home Menu
(page 27).
RETURN – Confirm and exit the current menu screen.
Press TUNER first to access:
TOOLS – Memorizes stations for recall, also used to
change the name (page 20).
Press BD or DVD first to access:
TOP MENU – Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
6
///
, ENTER
Use the arrow buttons when setting up your surround sound
system (page 27). Also used to control Blu-ray Disc/DVD
menus/options.
7 Component control buttons
The main buttons (, , etc.) are used to control a
component after you have selected it using the input function
buttons.
The controls above these buttons can be accessed after you
have selected the corresponding input function button (BD,
DVD and CD). These buttons also function as described
below.
Press TUNER first to access:
PTY – Use to search for RDS program types (page 21).
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 20).
TUNE +/– – Use to find radio frequencies.
PRESET +/– – Use to select preset radio stations.
8ECO
Press to select Ecology mode (page 23).
RECEIVER
RECEIVER
RECEIVER
VSX-S300_SYXCN_En.book 7 ページ ２０１１年４月８日　金曜日　午後８時１０分