Operation Manual
The Home Menu
06
30
En
06
The Pre Out Setting
Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1
Select ‘Pre Out Setting’ from the Home Menu.
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using
/
.
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3
When you’re finished, press RETURN.
You return to the Home Menu.
The Input Assign menu
The composite video input terminal is assigned to ANALOG
AUX under factory settings, but this can be changed to
DIGITAL AUX or CD input.
1
Select ‘Input Assign’ from the Home Menu.
2
Select ‘Composite Input’ from the Input Assign menu.
3
Select the desired input option for the composite video
input terminal.
Select between ANALOG AUX, DIGITAL AUX, CD or OFF.
•Use / and ENTER to do this.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear of the
receiver.
4
When you’re finished, press RETURN.
You return to the Input Assign menu.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
• Default setting: 6H
1
Select ‘Auto Power Down’ from the Home Menu.
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you’re finished, press RETURN.
You return to the Home Menu.
The FL Demo Mode menu
Set whether or not various demos are to be shown on the
front panel display.
1
Select ‘FL Demo Mode’ from the Home Menu.
2
Choose ON or OFF for the demo display.
3
When you’re finished, press RETURN.
You return to the Home Menu.
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
3.Pre Out Setting
Return
Pre Out Surr. Back
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
4.Input Assign
Return
a.Composite Input
4a.Composite Input
Return
Input
ANALOG AUX
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
6.Auto Power Down
Return
6H
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
7.FL Demo Mode
Return
FL Demo ON
VSX-S300_SYXCN_En.book 30 ページ ２０１１年４月８日 金曜日 午後８時１０分