User manual

27
> Network Functions > Specifications > Advanced Setup > Listening Modes
Troubleshooting Supplementary Information, etc�|
> Basic Manual
Setting Item Default Value Setting Details
Height Left 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Height Right 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Setting Item Default Value Setting Details
Surround Right 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surr Back Right 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surr Back Left 0 dB After selecting the speaker frequency from
between "63 Hz" and "16 kHz" with the cursors
/
, adjust the volume of that frequency between
"−12.0 dB" and "＋12.0 dB" with
/ .
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.