Operation Manual

31
SET
UP
Initial Set Up
SURROUND SETUP MENU
Speaker Setting
Starting from this procedure use the SURROUND SETUP menu. To access the menu follow steps 1-3 on p.27
and in step three choose SURROUND SETUP (“Surround Set” is shown on the receiver’s display). The steps
below show you how to specify the type of speakers you connected. Use the 5¥∞ buttons (or the MULTI JOG
dial) to make a selection and use the ENTER button to register the information.
1 Select “Speaker Set” from the SURROUND
SETUP MENU with the 5¥∞ buttons or
MULTI JOG dial (if continuing from the last
set up, it should already be selected).then
press the ENTER button.
See “Setting Up for Surround Sound“ on page 27 if you are
unsure how to do this.
2 “Speaker Set” will appear the display, press
ENTER again to move to the settings.
3 Specify the type of speakers you connected.
See the explanations below for the meaning
of each size.
1 Press ENTER. Use the 5 or ∞ buttons or MULTI JOG to
move the cursor to the speaker you want to adjust.
2 Press ENTER to select that speaker. The speaker name will
flash in the receiver's display.
3 Press 5 or ∞ to move the setting to LARGE, SMALL, or NO
depending on the size of your speakers (You can't select NO
for the FRONT speakers). See below for detailed explana-
tions.
4 Press ENTER.
5 Repeat steps 2 –4 for each speaker.
(see next page for explanations of sizes)
VSX-D709S
RETURN
MULTI JOG
(Turn to select / Push to enter)
Î
SOURCE
ENTER
LOUDNESS
INPUT ATT DIGITAL NR FL DIMMER
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
TV VOL
TV
TVFUNK
D.ACCESS BAND
GUIDE MENU
CLASS
RETURN
MIDNIGHT DSP STEREO FUNCTION
ADVANCED STANDARD MUTE
S.MODE CLEAR DTV INFO
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
/ DTS
RECEIVER DIRECT CONTROL
MPX DTV ON / OFF DTV MENU
CHANNEL
EFFECT/CH SEL
RECEIVER
TV CONTROL
MASTER VOLUME
DISC
+10
VIDEO SELECT
MULTI CONTROL
MULTI CH INPUT
DVD
CD CD-R TUN TVC
RECEIVER
1 2 3
4 5 6
7 8 9
 ! ⁄
0
*‹&
2
TV
VCR
1
VCR
2
4 ¢
¶
ENTER
TUNE
TUNE
ST ST
1-3
RDM