Operation Manual
30
Initial Set Up
Multi Channel In Setting
For most people this setting will not be necessary, if this is the case for you go on to the next setup. If you have
a Multi Channel external decoder you can choose whether to have the sound level set to BYPASS, which
bypasses the level adjust circuit or set to ADJUST, which goes through the level adjust circuit. If continuing from
Digital-In Select go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.27)
first.
1 Use the 5¥∞ buttons (or the MULTI JOG
dial) to select “Multi In Set”.
See “Setting Up for Surround Sound“ on page 27 if you are
unsure how to do this.
Press the ENTER button.
2 Use the 5¥∞ buttons (or the MULTI JOG
dial) to select the setting you want,
BYPASS or ADJUST.
ADJUST
Use the ADJUST setting when you want to be able to control
each channel level individually.
BYPASS
This setting is good for getting the cleanest possible signal. In
this setting you won’t be able to change each channel individu-
ally.
We recommend using BYPASS and the default setting is
BYPASS.
3 Press the ENTER button.
You will go to “Assign End”.
4 Press ENTER again and move on to
“Surround Set” (the Surround Setup Menu).
VSX-D709S
RETURN
MULTI JOG
(Turn to select / Push to enter)
\
Î
SOURCE
ENTER
LOUDNESS
INPUT ATT DIGITAL NR FL DIMMER
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
TV VOL
TV
TVFUNK
D.ACCESS BAND
GUIDE MENU
CLASS
RETURN
MIDNIGHT DSP STEREO
FUNCTION
ADVANCED STANDARD MUTE
S.MODE CLEAR DTV INFO
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
/ DTS
RECEIVER DIRECT CONTROL
MPX DTV ON / OFF DTV MENU
CHANNEL
EFFECT/CH SEL
RECEIVER
TV CONTROL
MASTER VOLUME
DISC
+10
VIDEO SELECT
MULTI CONTROL
MULTI CH INPUT
DVD
CD CD-R TUN TVC
RECEIVER
1 2 3
4 5 6
7 8 9
! ⁄
0
*‹&
2
TV
VCR
1
VCR
2
4 ¢
¶
ENTER
TUNE
TUNE
ST ST
1-4
RDM