Manual

ONE TOUCH OPERATION SET UP (GUI OPERATION)
IS C Intelligent
System Control
• Sets the operation signal that is transmitted when a remote
control ONE TOUCH OPERATION button is pressed.
• Initially, Pioneer remote control signals are transmitted.
(Figure 1)
2, Select LD from the five ONE TOUCH OPERATION SET
UP function buttons.
ONE TOUCH OPERATION SET UP indications are displayed.
(Example: LD)
(Figure 1: Initial settings for LD)
he transmitted signal is...
anufacturer ..... PIONEER
.................. POWER ON
..................... FUNC. LD
D .................. POWER ON
D ............................ PLAY
To operate other manufacturers' components, first complete
REMOTE SET UP procedures (P34)
Example: When you want to change LD ONE TOUCH
OPERATION commands.
1. Press the SET UP button for display of the operation
buttons of each function.
The SET UP MENU is displayed.
q)-t4;
: You can select which operation buttons will tra_sn_n
operation signals and those which will not.
When the operation button's character is black, a signal
will be transmitted. If it is gray, it will not be transmitted.
The button's character color changes each time it is
pressed.
With other manufacturers' components, if power is ON
when the POWER signal is transmitted, power is
swtiched OFF.
When the TV "FUNC" signal is transmitted, the TV
function may not become the function connected to
the receiver.
For this reason, when other manufacturers' presets are
called up with REMOTE SET UP, commands are not
automatically transmitted.
@,®
: TV and LD manufacturers settings are displayed.
3,
• If you use REMOTE SET UP (P.34) to call up another
manufacturers' presets, that manufacturers' name is
displayed.
• When you use the REMOTE SET UP learning function
(P35), the "PIONEER" indication becomes gray. Remote
control signals set with REMOTE SET UP are
transmitted.
To return to the original Pioneer remote control
commands, press the ON/OFF button (on the left of
"PIONEER") to turn the "PIONEER" indication black.
(If they are not the original Pioneer remote control
commands, even Pioneer components may switch OFF
when the POWER commands is transmitted, or there
may be some other incorrect operation.)
After completing settings, press the EXIT button.
NOTE:
With original Pioneer remote control commands, the TV function
always becomes "LD", so connect the receiver's VIDEO OUT (TO
MONITOR TV) terminal to the TV's LD video input terminal.
36
<ARB7035>