Manual

VIDEO RECORDING

Refer to the connection procedures on pages 8 to 12 and

refer to the VCR's Operating Instructions regarding proper

operation procedures. Recording can be performed on both

VCR 1 and VCR 2.

D:. ooooooooo ©i©

I" /

1. Select the source you want to record from with the

input selector buttons.

•When recording from a LaserDisc on VCR 1 orVCR 2 --* LD

•When recording from the TV tuner on VCR 1 or VCR 2

--* TV/SAT

•When recording from VCR 1 on VCR 2 --, VCR 1

•When recording from VCR 2 on VCR 1 --* VCR 2

•When recording on VCR 1 or VCR 2 from a component

connected to the front panel VIDEO INPUTjacks --, VIDEO

Start recording on the VCR.

For VCR, select a line input(external input).

Start playback on the component selected with the

input selector.

The volume, balance, and tone controls have no effect

on the recording.

NOTE:

When recording with VCR 1,be sure the input selector is set to a

position other than VCR 1. When recording with VCR 2, be sure the

input selector is set to a position other than VCR 2.

GUI operation enables easy copying from a Laserdisc to

VCR 1 (or 2), and copying between VCR 1 and VCR 2.

(Refer to page 32.)

SURROUND EFFECT AND DOLBY 3CH LOGIC

Adjust levels to achieve a correct surround sound

reproduction.

This is done using GUI (page 28). For details concerning

how to perform level adjustment, refer to page 33.

1. Select the desired mode with the DOLBY PRO-LOGIC

button, DSP MODE button, and DOLBY 3CH LOGIC

button.

The DSP MODE changes in sequence each time the DSP

MODE button is pressed. (The DSP MODE indicator lights.)

_,_JAZZ -_-DANCE ---* SIMULATED

SURROUND- I

off _ PRO-LOGIC THEATER 4--- HALL _* J