Manual

RECEIVING FM SIMULCAST TV PROGRAMS

By combining a TV set with this receiver, you can receive

FM simulcast TV programs (stereo TV sound transmitted

from an FM radio station) while viewing the video portion

on your TV.

1. Select the desired TV program with the TV set.

2. Tune in the desired FM simulcast TV program on the

receiver.

3. Adjust the volume and tone controls as desired.

I OPERATING THE AUDIO/VIDEO COMPONENTS

Press the power switch to the ON position, and turn on the

power to the other components you wish to use (for example,

TV, VCR, cassette deck, etc.).

PLAYBACK

1. Use the input selector buttons to select the desired

program source.

Program Source Input selector

To watch a video cassette tape on VCR 1

the VCR connected to VCR 1 jacks.

To watch a video cassette tape on VCR 2

the VCR connected to VCR 2 jacks.

To watch a VCR connected to

VIDEO

VIDEO INPUT jacks of front panel.

To watch the IV picture from a TV

tuner connected to the TV/SAT TV/SAT

jacks.

To watch a LaserDisc. LD

To listen to a tape on the cassette TAPE 1

deck connected to TAPE 1 jacks.

To listen to a tape on the cassette

deck connected to TAPE 2 TAPE 2 MONITOR

MONITOR jacks.

To listen to records. PHONO

To listen to compact disc. CD

If you select a music source other than TAPE 2, switch

OFF the TAPE 2 MONITOR.

2. Operate the appropriate audio/video component to

playback the program source.

For a video source, switch the TV connected to this unit

to the video input mode.

3. Adjust the volume and tone controls as desired.

Refer to pages 5,6 and 22 for details concerning surround

operation. (Surround operation is also possible with

GUI. Refer to page 33.)