Manual

REAR PANEL FACILITIES
(_) SUB WOOFER PRE OUT jack
If you want to boost the low frequencies, connect to a
subwoofer power amplifier.
@ CENTER PRE OUT jack
When a separate power amplifier is used to drive the surround
center speaker, connect the power amplifier to this jack.
@ TWO VOLTAGE SELECTORS switches
(Multi-voltage model only)
See page 4.
TAPE 1 jacks
Connect to the first cassette deck.
1_ CD input jacks
Connect to the output jacks of a compact disc player.
_) VCR 1 jacks
[VIDEO OUT]
Connect to the VCR 1 VIDEO INPUT jack.
[AUDIO OUT (L, R)]
Connect to the VCR 1 AUDIO INPUT jacks.
[VIDEO IN]
Connect to the VCR 1 VIDEO OUTPUT jack.
[AUDIO IN (L, R)]
Connect to the VCR 1 AUDIO OUTPUT jacks.
@ LD input jacks
Connect to an LD player's output jacks (audio, video).
TV/SAT (Satellite) jacks (input)
Use these jacks if you wish to connect a TV tuner with both
video and audio outputs.
@) CENTER SPEAKER terminals
Connect the center speaker to these terminals.
NOTE :
Do not allow any of the cord's conductors to protrude from the
terminalsor touchanyother conductors.Malfunctionsor breakdowns
mayoccur when conductors come intocontact with each other. Use
a center speaker with an impedance of 8 _ to 16£2.
REAR SPEAKERS terminals
Connect the rear speakers to these terminals.
NOTE:
• Do not allow any of the cord's conductors to protrude from the
terminals or touch any other conductors. Malfunctions or
breakdowns may occur when conductors come into contact with
eachother. Use rearspeakers with animpedanceof 8 _2to 16_ .
• Besure to connect two speakers (L, R). Therewill be no sound if
only one speaker is connected.
@ FRONT SPEAKERS terminals
A :Connect to the first set of speakers.
B :Connect to the second set of speakers.
NOTE:
Do not allow any of the cord's conductors to protrude trom th_
terminalsor touchanyother conductors.Malfunctions orbreakdowns
may occur when conductors come into contact with eachother. Use
front speakers with an impedance of 8 _ to 16_ .
@ Power cord
@ AC OUTLETS
(U.S. and Canadian models)
(SWITCHED TOTAL 100 W (0.8 A) MAX]
Power supplied through these outlets isturned on and off by the
receiver's POWER switch. Total electrical power consumption of
connected equipment should not exceed 100 W (0.8A).
(UNSWITCHED 100 W (0.8 A) MAX]
Power flows continually to this outlet, regardless of whether
the receiver is switched ON or OFF. Electrical power
consumption of the connected equipment should not exceed
100 W (0.8 A).
(Multi-voltage model)
(SWITCHED TOTAL 100 W MAX)
Power supplied through these outlets isturned on and off by the
receiver's POWER switch. Total electrical power consumption of
connected equipment should not exceed 100 W.
( UNSWITCHED 100 W MAX)
Power flows continually to this outlet, regardless of whether
the receiver is switched ON or OFF. Electrical power
consumption of the connected equipment should not exceed
100 W.
NOTE:
• This unit should be disconnected by removing the power plug from
the wall socket when not in regular use, e.g. when on vacation.
• Do not connect appliances with high power consumption such as
heaters, irons, or television sets to this AC OUTLETS in order to
avoid overheating and fire risk. This can cause the receiver to
malfunction.
CAUTION:
DO NOT CONNECT MONITOR OR TV SET.
14
<ARB7035>